STÉREA PRO
High-performance, polymer-modified, cementitious white tile adhesive (type C2TE, acc. EN 12004)
High-performance, polymer-modified, cementitious white tile adhesive, type C2TE according to EN 12004, for absorbent & non-absorbent small & medium-sized tiles (e.g. granite, natural stone, ceramics, porcellanato, decorative bricks) on surfaces where higher adhesion & moisture resistance are required. Resistance to moisture (e.g. bathrooms, WCs, balconies), reduced slip (T), extended open time (E); indoor & outdoor.
The manufacturer material we have does not give a consumption figure for this product. We will confirm quantities from its technical data sheet when you request a quote.
Specification
- EN 12004
- C2TE
- Consumption
- Not stated
- Packaging
- 25 kg bag
- Use
- interior, exterior, floor, wall
- Suitable for
- wet areas, terraces balconies
- Substrates
- concrete, cement mortars, brickwork, plasters, dry construction (with proper preparation), painted surfaces (with proper preparation)
- colour
- white
- slip
- reduced slip (T)
- open time
- extended open time (E)
- epd
- International EPD System logo shown on slide/bag
- selection matrix
- see reference/sterea-selection-matrix.json
- emicode
- EC1 badge on bag; GEV EMICODE EC1 PLUS licence 14522/01.02.22 for product 'STEREA' (p46)
Used in these systems
Tiling with STÉREA adhesives and ColorGroutData notes
- consumption not given in source (profile deck); needs TDS
- p23 says '4 products are available' but lists 5 (CERAMIC, PRO, FLEX, GEL, GEL FLEX)
- STÉREA matrix (p29) prints 'C12TE' for STEREA PRO while p23 and p25 say C2TE; recorded C2TE from the product slide
- product slide p25 lists painted surfaces as a substrate (with proper preparation) but the matrix p29 has no tick for PRO on PAINT
- terraces/balconies only for small & medium tiles per matrix footnote (1)
Source: TITAN Group profile 2026, page 25, 23, 29, 45.
Same class from Marmodom
Products declaring the same class (C2TE) meet the same minimum performance under the standard. They are not identical products — check the specification for your job.
