What we deliver
Engineering solutions across the full building lifecycle.
NUMASTEC combines engineering expertise with international quality standards to deliver reliable, efficient, and high-value assets — from energy efficiency and structural protection to turnkey construction and technical diagnostics.
01
Thermal Insulation & Energy Efficiency
Reduce energy costs. Improve comfort. Protect assets.
Our advanced insulation systems are engineered to reduce building energy consumption, lower operating costs, and improve indoor comfort year-round. From liquid-applied ceramic coatings that conform to any geometry without structural modification, to high-performance rigid and spray systems, Numastec delivers measurable energy efficiency gains across residential, commercial, and industrial assets.
Key capabilities
- ▸Reduces interior temperature by 8–15 °C on sun-exposed roofs
- ▸Cuts air-conditioning energy consumption by 20–35%
- ▸Applicable over concrete, metal, brick, and existing coatings
- ▸Conforms to curves and complex geometries — no cutting or mechanical fixing
- ▸Complies with international energy performance and sustainability standards
Suitable for: commercial roofs, industrial facilities, residential buildings, storage tanks, pipework.
02
Waterproofing
Total protection against moisture and deterioration.
Water ingress is one of the leading causes of structural deterioration and long-term asset value erosion. Numastec offers three waterproofing system families — ceramic, polyurethane, and cementitious — each matched to specific exposure conditions and substrates. Sub-systems address every application: roofs, balconies, terraces, foundations, wet areas, reservoirs, water tanks, channels, and transparent tile-preserving coatings.
Key capabilities
- ▸Polyurethane systems for roofs, balconies, terraces, foundations, and wet areas
- ▸Potable water waterproofing systems for tanks, reservoirs, and channels
- ▸Transparent waterproofing that preserves existing ceramic tile appearance
- ▸Ceramic-based waterproofing with up to 50% installation savings
- ▸Root-resistant systems for planted roofs and elevated landscaped decks
- ▸Trafficable grades for car parks, terraces, and accessible roofs
Suitable for: foundations, basements, balconies, terraces, wet rooms, water tanks, reservoirs, channels, roofs, facades. Also includes below-ground structures.
03
Structural Protection
Stop corrosion. Extend asset life by decades.
Corrosion is the most significant threat to the long-term integrity of steel and concrete structures. Numastec's structural protection systems use industrial-grade anti-corrosion coatings — ceramic, epoxy, and ceramic-epoxy hybrid systems — engineered for the harshest environments. Our ceramic and epoxy systems prevent penetration of water molecules and oxygen to the metal surface, isolating it from the two parameters that make corrosion possible.
Key capabilities
- ▸Ceramic & epoxy anti-corrosion systems for oil and gas facilities and reservoirs
- ▸Protection of hydropower structures and steel sheet piles (retaining walls and flood barriers)
- ▸Corrosion protection for ships, vessels, and marine structures
- ▸Protective linings for pipelines, tanks, and above-ground storage
- ▸Tested for drinking water environments; rated for extreme temperatures (−30 °C to +60 °C)
- ▸Dramatically extended maintenance intervals — up to 15–25 years
Suitable for: oil and gas facilities, hydropower plants, ships and vessels, marine structures, bridges, pipelines, industrial plants.
04
Moisture Protection
Permanently dry buildings. No more damp.
Persistent moisture infiltration and condensation degrade finishes, saturate insulation, and compromise structural elements over time. Numastec's moisture protection systems address root causes — not symptoms — through vapour-control membranes, breathable hydrophobic coatings, and internal damp-proofing that create permanently dry building environments without disrupting occupants.
Key capabilities
- ▸Vapour-control membranes preventing condensation from forming inside wall and roof structures
- ▸Breathable hydrophobic coatings for external walls and facades
- ▸Internal damp-proofing for existing affected walls
- ▸Tanking systems for basements and below-ground spaces
- ▸Suitable for occupied buildings — low odour, water-based systems
Suitable for: residential buildings, basements, commercial interiors, heritage structures, below-ground spaces.
05
Fungal & Biological Protection
Eliminate mould, algae, and biological growth — for good.
Mould, algae, and biological growth are not just cosmetic problems — they degrade air quality, trigger health issues, damage building materials, and signal underlying moisture and ventilation failures. Numastec's fungal and biological protection treatments eliminate existing growth and apply long-lasting anti-fungal and anti-algae surface barriers to prevent recurrence.
Key capabilities
- ▸Anti-fungal surface treatments with long-term residual protection
- ▸Anti-algae and anti-lichen coatings for facades and roofs
- ▸Safe remediation of existing mould-affected surfaces
- ▸Compatible with thermal insulation and waterproofing systems
- ▸Formulated in compliance with European biocidal product regulations (BPR 528/2012)
Suitable for: bathrooms, basements, facades, roofs, heritage buildings, commercial and residential interiors.
06
Roofing Systems
High-performance roofing built to outlast.
Numastec delivers high-performance roofing solutions that combine durability, energy efficiency, superior waterproofing, and dramatically reduced maintenance requirements. Our ceramic membrane technology bonds directly to existing substrates, forming a seamless UV-reflective surface that extends roof service life by 15–25 years — without demolition or tear-off. For new builds, we specify and install complete roofing systems to international standards.
Key capabilities
- ▸Ceramic membrane application over existing roof — no tear-off required
- ▸New roofing system installations for commercial and residential buildings
- ▸Restoration of failed bitumen, single-ply, and built-up roof systems
- ▸Roof survey and condition assessment service
- ▸15–25 year design life with minimal routine maintenance
Suitable for: commercial buildings, industrial facilities, residential terraces, warehouses.
07
Construction & Renovation
New builds and full renovations — delivered end to end.
Numastec manages the complete lifecycle of construction and renovation projects — from initial planning and design through to final handover. Whether a new residential or commercial development, or a full-scale building renovation, a single team oversees every stage, eliminating coordination risk and maintaining quality control throughout.
Key capabilities
- ▸New residential construction — houses, apartments, and developments
- ▸Commercial construction — offices, retail, industrial, and mixed-use
- ▸Full building renovations and modernization projects
- ▸Single point of responsibility across all project stages
- ▸Collaboration with international engineers, architects, and consultants
Suitable for: property developers, investors, private owners, government and institutional projects.
08
Architecture & Design
Functionality, aesthetics, and commercial value — in balance.
Our architectural design service delivers solutions that balance aesthetics, functionality, sustainability, and long-term commercial value. Numastec collaborates with a multidisciplinary team of international engineers, architects, and designers to produce technically rigorous and visually outstanding projects. We bring the same precision to design that we bring to construction.
Key capabilities
- ▸Concept design and feasibility studies
- ▸Full architectural design and planning application support
- ▸Interior design and space optimization
- ▸Sustainability and energy efficiency integration from design stage
- ▸Coordination with structural, MEP (mechanical, electrical & plumbing), and landscape consultants
Suitable for: developers, investors, private clients, hospitality, commercial, and residential projects.
09
Technical Inspection & Building Diagnostics
Informed decisions. Managed risk. Verified condition.
Before investing in a property, launching a renovation, or approving a construction handover, you need an objective technical assessment. Numastec's inspection and diagnostics division provides comprehensive building condition surveys, technical due diligence, and modernization strategies — delivering the evidence base required for confident, risk-managed decision-making.
Key capabilities
- ▸Pre-purchase technical due diligence and condition surveys
- ▸Construction quality control and independent inspection
- ▸Moisture, thermal, and structural diagnostics
- ▸Modernization and asset improvement strategies
- ▸Compliance verification against international quality and safety standards
Suitable for: investors, property owners, developers, lenders, insurers, and government bodies.
Ready to start?