Product range
Materials engineered for long-term performance.
Every Numastec product is developed using proprietary chemistry and engineering know-how, validated in real project conditions across Cyprus, Europe, and beyond.
Thermal Insulation
2 products
Ceramic Thermal Insulation Coating
Measurable heat reduction in a single liquid-applied coat.
Thermal conductivity
0.07–0.10 W/m·K (system-dependent)
ETICS External Facade Insulation System
Up to 60% energy savings — without rebuilding.
Energy saving
Up to 60% reduction in heating and cooling energy
Waterproofing
10 products
Polyurethane Liquid Membrane — 1-Component
Ready-to-use seamless waterproofing for demanding exposed surfaces.
Coverage
1.0–1.5 kg/m² per coat (2–3 coats standard)
Polyurethane Liquid Membrane — 2-Component
High-performance sealing for below-grade and structural applications.
Mixing ratio
Component A : B = 3:1 by weight
Cementitious Waterproofing Coating
Cement-based waterproofing certified for potable water contact.
Coverage
1.5–2.0 kg/m² for 2 coats (≈1.5 mm dry film)
Crystalline Waterproofing Treatment
Permanent, self-sealing waterproofing that grows into the concrete.
Coverage (surface treatment)
0.8–1.0 kg/m² per coat
Ceramic Waterproofing Coating
Fluid-applied liquid membrane — ceramic toughness, elastomeric flexibility.
Coverage
0.8–1.2 kg/m² per coat (2 coats standard)
Balconies & Terraces Waterproofing System
Liquid-applied polyurethane waterproofing for open-air exposed areas.
Coverage
1.0–1.5 kg/m² per coat (2–3 coats standard)
Foundations & Retaining Walls Waterproofing
Essential external waterproofing for every building with a basement.
Coverage
1.2–1.8 kg/m² per coat (2–3 coats standard)
Wet Areas & Under-Tile Waterproofing
Complete under-tile waterproofing for bathrooms and wet rooms.
Coverage
1.0–1.5 kg/m² per coat (2 coats standard)
Reservoirs, Water Tanks & Channels Waterproofing
Certified liquid-applied waterproofing for potable and process water containment.
Coverage
1.2–1.8 kg/m² per coat (2–3 coats standard)
Transparent Waterproofing System
Clear waterproofing technology — protecting tiled surfaces without changing their appearance.
Coverage
0.3–0.6 L/m² per coat (2 coats recommended)
Roofing
2 products
Ceramic Membrane Roofing System
The last roof coating you will ever need.
Coverage
1.0–1.5 kg/m² per coat (2 coats recommended)
Re-Ply System™ Roof Restoration
The solution for all your roofing problems.
Coverage
1.5–2.0 kg/m² per coat (2 coats recommended)
Moisture & Biological Protection
2 products
Hydrophobic Facade Impregnation
Invisible protection. Surfaces stay dry — without changing appearance.
Coverage
0.2–0.5 L/m² (substrate porosity dependent)
Anti-Fungal & Anti-Algae Surface Treatment
Eliminate biological growth and prevent recurrence — long term.
Coverage
5–10 m² per litre depending on substrate porosity
Structural Protection
2 products
Anti-Corrosion Epoxy Coating System
Industrial-grade corrosion control for steel and concrete structures.
Number of components
Two-component — resin + hardener
Structural Concrete Repair Mortar
Restore deteriorated concrete to original design strength.
Compressive strength (28 days)
>50 MPa (EN 12190)
Anti-Corrosion
2 products
Marine & Industrial Anti-Corrosion System
Ultimate corrosion encapsulation for marine and industrial environments.
Application temperature
−30 °C to +60 °C
AQUATA® Anti-Corrosion Coating
A solvent-free epoxy lining for steel in permanent contact with water, tested by BAW Karlsruhe.
Type
Two-component, solvent-free epoxy, 100 % solids
Flooring
5 products
Self-Leveling Floor Screed
Perfectly flat floors — fast. Ready for any finish within 24 hours.
Compressive strength (28 days)
>30 MPa (EN 13813 CT-C30-F5)
Industrial Epoxy Floor Coating System
Seamless, chemical-resistant floors built for industrial demands.
System thickness
2–6 mm depending on grade selected
Internal Car Park Flooring System
Seamless, abrasion-resistant, anti-skid waterproofing flooring for internal car parks.
System thickness
2–4 mm depending on traffic class
External Car Park Flooring System
Cold-applied, seamless, UV-resistant anti-skid flooring for exposed car parks.
System thickness
2–4 mm depending on traffic class
Industrial & Commercial Heavy-Duty Flooring
Heavy-duty flooring for production plants, warehouses, and hospitals.
A thick-build polyurethane flooring system for the most demanding commercial and industrial environments — production plants, logistics warehouses, professional kitchens, hospitals, and large commercial structures. Provides outstanding resistance to heavy machinery, vehicular traffic, spills of oils, fuels, solvents, and detergents, and impact from heavy and sharp tools. Anti-skid, puncture-resistant, and dust-free with an easy-to-clean surface that supports the highest hygiene standards.
System thickness
3–8 mm depending on application class
Abrasion resistance
Heavy-duty industrial grade
Chemical resistance
Oils, fuels, solvents, detergents, common chemicals
Technical documentation
Catalogue, TDS & SDS
Download the full product catalogue, or contact our team to request Technical Data Sheets and Safety Data Sheets for your specific application or project specification.