INTERMIX
ThermaBond FIX
Polymer-modified, cementitious, adhesive mortar for EPS thermal insulation boards
Polymer-modified, cementitious adhesive mortar for EPS thermal insulation boards (adhesive only, not a base coat). Coarse (max grain size 2 mm), thixotropic (no sagging), application thickness up to 20 mm.
The manufacturer material we have does not give a consumption figure for this product. We will confirm quantities from its technical data sheet when you request a quote.
Specification
- Consumption
- Not stated
- Packaging
- 25 kg bag
- Layer thickness
- ?–20 mm
- Use
- exterior, wall
- Suitable for
- etics, facades
- Substrates
- EPS boards (adhesion)
- colour
- grey
- max grain mm
- 2
- granulometry
- coarse
- boards
- EPS only
- use
- thermal boards adhesive only
- bag text gr
- Ρητινούχο, τσιμεντοειδές, κονίαμα επικόλλησης θερμομονωτικών πλακών EPS (bilingual on bag)
- epd
- International EPD System logo shown on slide/bag
Used in these systems
ThermaBuilt® ETICSData notes
- consumption not given in source (profile deck); needs TDS
- p34 says 'application width up to 20mm'; matrix p35 says 'Application Thickness (max) 20 mm'; recorded as thickness
Source: TITAN Group profile 2026, page 33, 34, 35, 45.