Marmodom
BOARD PRIMER
Acrylic plaster adhesion primer for deep penetration.
Primer for gypsum boards, cement boards, old masonry, highly absorbent surfaces (aerated concrete etc.) and superficially loose surfaces. Gives hydrophobicity and deep penetration and increases substrate stability, preparing the surface for finishing plasters, tile adhesives, paints, etc. Suitable for all cementitious decorative, coloured or white plasters and spatulated surfaces.
Specification
- Consumption
- 100 g/m² (approx., depending on dilution and type of substrate)
- Packaging
- 20 kg container · 5 kg container · 1 kg container
- Suitable for
- aac blocks
- Substrates
- gypsum boards, cement boards, old masonry, highly absorbent surfaces (aerated concrete), superficially loose surfaces
Used in these systems
Standard floor and wall tilingData notes
- dilution ratio not stated although consumption depends on dilution
- the bucket label in the packshot appears to read '18kg' (low-resolution) while the text says 20 kg; packaging taken from the text
- website packshot shows a 18 kg pack; catalogue packaging says 1, 5, 20 kg
Source: Marmodom products catalogue, page 42.