BIOPANOPLY XPS
MARMODOM's EAD 040083-00-0404 certified, EOTA-approved external thermal insulation system (ETICS) with extruded polystyrene (xps) insulation boards. Components are as named in the product texts for the BIOPANOPLY XPS variant.
FacadesExternal wallsEAD 040083-00-0404 (EOTA-approved)
| Layer | Products | Consumption |
|---|---|---|
| Adhesive for bonding the insulation boards | 3–4 kg/m² 4–6 kg/m² 4–6 kg/m² 4–6 kg/m² 12–15 kg/m²/cm | |
| Extruded polystyrene (XPS) insulation boards | data sheet | |
| Anchors | data sheet data sheet | |
| Corner beads Optional: at external corners and edges | data sheet | |
| Water drip profiles Optional: at vertical-to-horizontal transitions such as balconies and lintels | data sheet | |
| Fibre-reinforced base coat (embeds the mesh) | 4–6 kg/m² 4–6 kg/m² 4–6 kg/m² 12–15 kg/m²/cm | |
| Reinforcing fiberglass mesh | 1.1 m/m² | |
| Final decorative coat | 2–3.5 kg/m² 2–3.5 kg/m² |
Notes on this system
- No variant-specific diagram in the catalogue; layer order follows the p.10 ETICS diagram and component statements in the product texts.
- The p.10 diagram shows a 'Starting guide' (starter profile) at the base of the boards, but no such product is catalogued; it is not represented as a layer.
- No primer is stated as a BIOPANOPLY XPS component: BIOPRIMER names EPS / WOOL only. Confirm with Marmodom whether a primer is required under the finish on XPS.
- DECOPLASTER and EASY ROLL are stated for BIOPANOPLY (EPS / WOOL) only, so they are excluded from XPS.