Large-format tiling
For large tiles (the catalogue's example is 60x120 cm) the substrate must be completely level, without unevenness. Level it with a self-levelling cement mortar such as HYPLAN ULTRA (1-15 mm, indoor) before laying with an adhesive suited to large tiles, then grout and seal.
Living spacesKitchensFloor screeds
| Layer | Products | Consumption |
|---|---|---|
| Primer Optional: where high adhesion strength is required under self-levelling floors (SUPER BOND PRIMER text, p42); a primer decision must be made before applying adhesive (p25) | 100–150 g/m² | |
| Self-levelling cement mortar required unless the substrate is already completely level | 1.7 kg/m²/mm | |
| Tile adhesive for large tiles | 1.5 kg/m²/mm 1.5 kg/m²/mm 3–5 kg/m² 3–5 kg/m² | |
| Tile grout | by tile size and joint by tile size and joint by tile size and joint | |
| Elastic / expansion joints | 3 m²/tube |
Notes on this system
- generic system compiled from the p25 laying principle and the product texts; it is not a catalogue diagram
- 60x120 cm is the catalogue's example of a large tile, not a stated threshold
- HYPLAN ULTRA is indoor-only; no exterior levelling product is named for large tiles in section 2