Marmodom
HYPERSHIELD
Fiber-reinforced synthetic resin liquid sealing membrane.
DM 02P
Ready-to-use, fibre-reinforced, water-based membrane with synthetic resin, classified DM 02P according to EN 14891. Fibre-reinforced for maximum elasticity and resistance, even at low temperatures; no mesh or sealing tapes are required to protect the corners and edges of the sealing system. Very low VOC emissions. Used for sealing interior and exterior wet areas: homes, bathrooms, showers, spas, hot tubs, balconies, terraces and swimming pools. Can be applied to non-absorbent substrates such as tiled floors.
Specification
- EN 14891
- DM 02P
- Consumption
- 1.4–2 kg/m² (total for all layers, depending on substrate)per-coat table on the product sheet
- Packaging
- 10 kg bucket, 64 per pallet
- Use
- interior, exterior
- Suitable for
- wet areas, terraces balconies, pools, non absorbent substrates, over old tiles, low voc
- Substrates
- cement floor screeds, lightweight panels with cementitious levelling layers, gypsum, wood panels, concrete, fibre-reinforced cement board, self-levelling cement mortars, existing ceramic tiles, mosaics, natural stones
- product line
- HYDOM (Hybrid Building Technology)
- ready to use
- yes, water-based
- first layer dilution
- first layer diluted with 10% water (per consumption table)
- corners and edges
- no mesh or sealing tapes required to protect corners and edges
- low temperature
- elastic and resistant even at low temperatures
Used in these systems
Swimming pool tiles installation systemExternal areas waterproofing – inverted roof ("Inverted dome")Wet-room waterproofing under tilesData notes
- per-substrate layer table read from the render (text layer interleaves columns); for the gypsum/wood/concrete/board/tile row the first-layer cell is blank and the total is 1.4 = 0.7 + 0.7
Source: Marmodom products catalogue, page 50.