Marmodom
HYPROOF EXTREME
Waterproofing and uncoupling membrane suitable for use before tile installation.
Waterproofing and uncoupling membrane laid before tiling, indoors and outdoors, with extremely low VOC emissions. It separates the tile layer from the substrate so stresses, movements and cracks from thermal and hygrometric contraction are not transferred, and seals against direct water and constant moisture. Complies with EN 13956, stays elastic down to -30 °C, and can go over existing ceramic or natural-stone floors to restore old balconies and terraces.
Specification
- EN 13956
- — (complies with the requirements for plastic waterproofing membranes; no class given)
- Consumption
- Not stated
- Packaging
- 30 m roll
- Layer thickness
- 0.5–0.5 mm
- Use
- interior, exterior, floor
- Suitable for
- over old tiles, terraces balconies, wet areas, low voc
- Substrates
- existing ceramic tile floors, existing natural stone floors, substrate / screed
- product line
- HYDOM
- roll width
- 100 cm
- roll length
- 30 m
- thickness
- 0.50 mm
- application temperature
- +5 °C to +30 °C
- service temperature
- -30 °C to +90 °C
Used in these systems
Tiles installation on uncoupling / waterproofing membrane system (HYPROOF EXTREME)Colours
Grey
Data notes
- no consumption, overlap width or bonding-adhesive quantity stated; the p43 diagram shows it bedded in C2TES1 adhesive
- 'wet_areas' from the p43 intro text (bathrooms, spas, swimming pools)
- floor=true from the diagram and the balcony/terrace text; wall use is not stated explicitly
Source: Marmodom products catalogue, page 44, 43.