Tiles installation on uncoupling / waterproofing membrane system (HYPROOF EXTREME)
HYPROOF EXTREME uncoupling/waterproofing membrane bedded in C2TES1 adhesive on the substrate/screed, then tiles in C2TES1 adhesive, grout, and elastic sealant. The membrane separates tiles from substrate movement and seals against direct water and constant moisture (bathrooms, spas, swimming pools). It can also go over existing tile or stone floors on old balconies and terraces.
Bathrooms & wet roomsBalconiesTerraces
| Layer | Products | Consumption |
|---|---|---|
| Tiles adhesive C2TES1 (EN 12004) bonding the membrane | 1.5 kg/m²/mm 3–5 kg/m² 3–5 kg/m² | |
| Uncoupling / waterproofing membrane | data sheet | |
| Joint tape, corners and pipe collars Optional: at membrane joints, internal/external corners and pipe penetrations | data sheet data sheet data sheet | |
| Tiles adhesive C2TES1 (EN 12004) | 1.5 kg/m²/mm 3–5 kg/m² 3–5 kg/m² | |
| Tiles grout | by tile size and joint by tile size and joint | |
| Elastic / expansion joints | 3 m²/tube |
Notes on this system
- layer 3 (accessories) is inferred from the p44-45 product texts and is not in the diagram
- zone 'balcony'/'terrace' from the HYPROOF EXTREME advantages (p44); the diagram shows a bathroom; the p43 text also mentions spas and swimming pools