Marmodom
HYDROCEM
New generation, single-component, hybrid polymer-based cementitious sealing mortar.
CM 01P
One-component cementitious membrane of category CM 01P according to EN 14891, equivalent to two-component systems. Resistant to chlorine and alkaline substances, with high adhesion both to the substrate and of bonding products on it; wide range of miscibility with water, excellent workability and high breathability. Used for elastic waterproofing of substrates prior to installing ceramic tiles and natural stones. Adhesives classified C2TES1 or higher must be used for laying tiles or slabs on it.
Specification
- EN 14891
- CM 01P
- Consumption
- 1.2 kg/m² per mm of thickness
- Packaging
- 20 kg bag, 72 per pallet
- Suitable for
- terraces balconies, pools, over old tiles, non absorbent substrates
- Substrates
- absorbent substrates, non-absorbent substrates, concrete floors, existing ceramic tile floors, existing natural stone floors, cured concrete
- product line
- HYDOM (Hybrid Building Technology)
- tile adhesive required on top
- C2TES1 or higher (EN 12004)
- resistance
- chlorine and alkaline substances
Used in these systems
HYPANOPLY PearlHYPANOPLY ImpactHYPANOPLY Anti-GraffitiSwimming pool tiles installation systemExternal areas waterproofing – inverted roof ("Inverted dome")Wet-room waterproofing under tilesData notes
- consumption line is garbled in the text layer ('perConsumption:mm layer~1.2thickness'); value read from render as ~1.2 kg/m² per mm
Source: Marmodom products catalogue, page 48.